• ZHANG Shihong
    Title:Professor Email: shzhang@imr.ac.cn
    Tel. : +86-24-83978266 FAX: +86-24-23891320
    Division: Specialized Materials and Devices Division, Shenyang R & D Centre for Advanced Materials
    Address: Specialized Materials and Devices Division, Institute of Metal Research Chinese Academy of Sciences (IMR CAS), 72 Wenhua Road, Shenyang, China, 110016

Experience:

1999-present   Professor,
              
Leader of Advanced Metal Forming Technology Group,
              
Vice Director of Special Materials and Devices
              
Institute of Metal Research, Chinese Academy of Sciences (IMR/CAS)
              
Director of Engineering Research Centre for Precision Copper Tubes (ERC/PCT), CAS

 

1998-1999   Professor at Harbin Institute of Technology

1996-1998   Researcher at Aalborg University, Denmark

1995-1996   Researcher at DANFOSS A/S, Denmark

1993-1995   Associate Professor at Harbin Institute of Technology

1991-1993   Post-doctor Research Fellow, Dept. of Mechanics, Harbin Institute of Technology

Sept 1988-Sept 1991,   PhD student, Dept. of Materials Science & Technology 
                       
Harbin Institute of Technology

Sept 1985-July 1988,   MSc student, Dept. of Materials Science & Technology,
                      
Harbin Institute of Technology

Sept 1981-July 1985,   BSc student, Dept. of Materials Science & Technology,
                       
Harbin Institute of Technology

Research Interest:

(1) Research on warm deformation mechanism of Mg alloys during DSR rolling and warm sheet forming, Warm forming process and press forging of magnesium alloy sheet products.

(2) Computer simulation with microstructure prediction during plastic forming processes, especially for Ti alloys, Mg alloys and super alloys;

(3) Tube fabrication and tube forming processes, especially for thin stainless tubes, Ti tubes, supper alloy tubes, and cast and roll forming of copper tubes

(4) Forming technology for auto parts, such as auto wheels, stamped auto parts

Research Achievement:

Service to the International Professional Societies:

Service to the International Professional Societies: Chair of Numiform’2013. Chair of IDDRG2015. Member of Scientific Committee of ICTP2008, 2011, 2014 Service to the International Journals: Member of Editorial Board of Rare Metals. Member of Editorial Board of Modeling and Numerical Simulation of Material Science.

Honors:

Publication:

[1] J S. Liu, S H Zhgang, etc. Applications of MSC.MARC in Materials Processing; Beijing: Water Pub Lited, March 2010

[2] S H Zhang etc, Advanced metal Forming Processes, Beijing: Science Pub House, July 2012

[3] J S Liu etc, Application of Simufact on Materials Forming and Engineering Control,  Beijing: Water Pub Lited, April 2012

[4] Bin Wang, S H Zhang, M Cheng, H W Song, Dynamic Recrystallization Mechanism of Inconel 690 Superalloy During Hot deformation at High Strain Rate, Journal of Materials Engineering and Performance: Volume 22, Issue 8 (2013), Page 2382-2388

[5] Y. Xu, S.H. Zhang, M. Cheng and H.W. Song,In situ X-ray diffraction study of martensitic transformation in austenitic stainless steel during cyclic tensile loading and unloading, Scripta Materialia 67 (2012) 771–774

[6] Y. Xu, S H Zhang, The enhancement of transformation induced plasticity effect on austenitic stainless steels by cyclic tensile loading and unloading, Materials Letters 65 (2011) pp. 1545-1547

[7] G.S.Song, S H Zhang, L Zheng, L. Q Ruan, Twinning, Grain Orientation and Texture Variation of AZ31 Mg Alloy during Compression by EBSD Tracing, Journal of Alloys and Compounds 509 (2011) pp. 6481-6488

[8] S H Zhang, H Y Zhang, M Cheng, Tensile deformation and fracture characteristics of delta-processed Inconel 718 alloy at elevated temperature, Materials Science & Engineering A 528 (2011) pp. 6253-6258

[9] S.H. Zhang, G.L. Zhang, J.S. Liu, C.S. Li, R.B. Mei, A fast rigid-plastic finite element method for online application in strip rolling, Finite Elements in Analysis and Design, 46, Issue 12, (2010) pp. 1146-1154

Homepage: