研究队伍
院士专家
研究部主任
博士生导师
杰出青年基金获得者
优秀青年基金获得者
万人计划
创新人才推进计划
研究员
副研究员
张健
性 别 最高学历 博士研究生
职 称 研究员 专家类别 博士生导师,中科院“百人计划”入选者
部 门 沈阳先进材料研究发展中心 高温合金研究部
简历:

  1989.09-1993.07,西南交通大学,本科

  1993.09-1996.03,西南交通大学,硕士

  1996.03-1999.06,中国科学院金属研究所,博士

  1998.08-2000.03,英国Brunel大学,联合培养博士/博士后

  2000.03-2003.03,德国Erlangen-Nuremberg大学,助理研究员

  2002.08,入选中科院“百人计划”引进海外杰出人才

  2003.03 至今,中国科学院金属研究所高温合金研究部研究员

  2010.01,中国科学院金属研究所高温合金研究部主任

研究领域:

  先进定向和单晶高温合金的成分设计及损伤机理;

  先进定向和单晶高温合金的缺陷形成机制及控制技术研究;

  高温度梯度液态金属冷却定向凝固技术及应用。

承担科研项目情况:

3D views of micro-pores in the sample exposed at 1603 K (1330 oC) for (a) 0 h, (b) 1 h, (c) 4 h, (d) 7 h, (e) 12 h, and (f) 20 h. The equivalent diameter of S-pores is labeled in the bracket.

Evolution of micro-pores in a third-generation single-crystal nickel-based superalloy during solution heat treatment at 1603 K (1330 oC) was investigated by X-ray computed tomography. 3D information including morphology, size, number, and volume fraction of
micro-pores formed during solidification (S-pores) and solution (H-pores) was analyzed. The growth behaviors of both S-pores and H-pores can be related to the vacancy formation and diffusion during heat treatment.

Secondary electron micrograph and corresponding X-ray micrograph of sample corroded for 80 h. The white needle-like phase enriches Ta and S, while the dark dot-like phase enriches Cr and S.

Hot corrosion behavior of a Ni-base single crystal superalloy with low Cr, Ti and high Ta contents in molten sodium sulphate (Na2SO4) at 900 oC in static air was investigated using the “deposit recoat” method. The corrosion scale was composed of an outer NiO layer, an inner Al2O3-dominant oxide network layer and a (CrSx(1.0002) sulphide layer. Ta was found to exhibit a beneficial effect by promoting the formation of NaTaO3 and TaS2, and therefore inhibiting the formation of liquid phases Na2MoO4 and Ni-sulphides.

社会任职:

  美国材料与矿冶学会(TMS)高温材料委员会 委员

  中国材料研究学会          常务理事

  中国材料学会青年工作委员会     理事

  中国金属学会高温合金委员会     委员/副理事长

  航空学会材料工程专业分会      委员

  辽宁省科学技术协会         委员

  金属学报英文版编委         委员

获奖及荣誉:

  2002年 中科院“百人计划”引进海外杰出人才

  2011年 辽宁省“百千万人才工程”百人层次

  2015年 国务院特殊津贴

  2017年 国家万人计划科技创新领军人才

代表论著:

  1. Evolution of micro-pores in a single-crystal nickel-based superalloy during solution heat treatment, X. W. Li, L. Wang, J. S. Dong, L. H. Lou, J. Zhang, Metall. Mater. Trans. A 48 (2017) 2682-2686

  2. Interaction of Ta and Cr on Type-I hot corrosion resistance of single crystal Ni-base superalloys, J. X. Chang, D. Wang, G. Zhang, L. H. Lou, J. Zhang, Corros. Sci. 117 (2017) 35–42

  3. Fracture morphology and mechanism of a directionally solidified Al2O3/Y3Al5O12 eutectic single crystal, X. Wang, Y. J. Zhong, D. Wang, Q. G. Xian, J. Y. Wang, L. H. Lou, J. Zhang, Scripta. Mater. 135 (2017) 46-49

  4. Mechanism of eutectic growth in directional solidification of an Al2O3/Y3Al5O12 crystal. X. Wang, D. Wang, H. Zhang, Z. L. Tian, K. Du, J. Y. Wang, L. H. Lou, J. Zhang, Scripta. Mater. 116 (2016) 44-48

  5. Effect of skew angle of holes on the tensile behavior of a Ni-base single crystal superalloy, Z. J. Zhou, L. Wang, J. L. Wen, L. H. Lou, J. Zhang, J. Alloy. Compd. 628 (2015) 158-163

  6. 镍基单晶高温合金冷热循环过程中圆孔周围裂纹萌生与扩展行为,王莉,周忠娇,张少华,降向冬,楼琅洪,张健,金属学报,51 (2017) 1273-1278

  7. Role of tantalum in the hot corrosion of a Ni-base single, J. X. Chang, D. Wang, T. Liu, G. Zhang, L. H. Lou, J. Zhang, Corros. Sci. 98 (2015) 585-591

  8. 液态金属冷却法制备重型燃机定向结晶空心叶片,卢玉章,席会杰,申健,郑伟,谢光,楼琅洪,张健,金属学报,51 (2015) 603-611

  9. Microstructure evolution of Al2O3/Y3Al5O12 eutectic crystal during directional solidification, X. Wang, J. Y. Wang, L. C. Sun, H. Zhang, L. Wang, L. L. Hong, J. Zhang. Scripta Mater. 108 (2015) 31-34

  10. The effect of long-term thermal exposure on the microstructure and stress rupture property of a directionally solidified Ni-base superalloy, X. W. Jiang, D. Wang, G. Xie, H. Li, L. H. Lou, J. Zhang, Metall. Mater. Trans. A 45 (2014) 6016-6026

  11. Influence of Ta content on hot corrosion behaviour of a directionally solidified nickel base superalloy, F. F. Han, J. X. Chang, H. Li, L. H. Lou, J. Zhang, J. Alloy. Compd. 619 (2015) 102-108

  12. Microstructure and grain orientation evolution of a specially shaped shroud during directional solidification process, H. Q. Hao, W. G. Jiang, G. Xie, G. Zhang, Y. Z. Lu, J. Zhang, L. H. Lou, Prog. Nat. Sci-Mater. 23 (2013) 211-215

  13. Orientational dependence of recrystallization in a nickel base single crystal superalloy, G. Xie, L. Wang, J. Zhang, L. H. Lou, Scripta Mater. 66 (2012) 378-381

  14. Improved castability of directionally solidified Ni-based superalloy by the liquid metal cooling process, C. Liu, K. W. Li, J. Shen, J. Zhang, L. H. Lou, Metall. Mater. Trans. A 43 (2012) 405-408

  15. Effect of eutectics on plastic deformation and subsequent recrystallization in the single crystal nickel base superalloy CMSX-4, L. Wang, F. Pyczak, J. Zhang, L. H. Lou, R. F. Singer, Mater. Sci. Eng. A 532 (2012) 487-492

  16. Intermediate temperature creep of directionally solidified Ni-base superalloy containing local recrystallization, G. Xie, L. Wang, J. Zhang, L. H. Lou, Mater. Sci. Eng. A 528 (2011) 3062-3068

  17. On the role of phase during high temperature creep of a second generation directionally solidified superalloy, D. Wang, J. Zhang, L. H. Lou, Mater. Sci. Eng. A 527 (2010) 5161-5166

  18. On the role of eutectics during recrystallization in a single crystal nickel-base superalloy CMSX-4, L. Wang, F. Pyczak, J. Zhang, R.F. Singer, Int. J. Mater. Res. 100 (2009) 1046-1051

  19. Formation and stability of nano-scaled M23C6 carbide in a directionally solidified Ni-base superalloy, D. Wang, J. Zhang, L. H. Lou, Mater. Character. 60 (2009) 1517-1521

  20. Effect of heat treatment atmosphere on surface recrystallization of a directionally solidified Ni-base superalloy, G. Xie, J. Zhang, L. H. Lou, Scripta Mater. 59 (2008) 858-861

  21. Influence of surface recrystallization on the high temperature properties of a directionally solidified Ni-base superalloy, G. Xie, L. Wang, J. Zhang, L. H. Lou, Metall. Mater. Trans. A 39 (2008) 206-210

  22. Directional solidification assisted by liquid metal cooling, J. Zhang, L. H. Lou, J. Mater. Sci. Technol. 23 (2007) 289-300

  23. On the role of carbides during the recrystallization of a directionally solidified nickel-base superalloy, L. Wang, G. Xie, J. Zhang, L. H. Lou, Scripta Mater. 55 (2006) 457-460

  24. Hot tearing in directionally solidified Ni-based superalloys during directional solidification, J. Zhang, R. F. Singer, Acta Mater. 50 (2002) 1869-1879

  25. Effect of Zr and B on castability of Ni-based superalloy IN792, J. Zhang, R. F. Singer, Metall. Mater. Trans. A 35A (2004) 1337-1342.

国内国际会议:

  1. 燃气轮机用高温合金材料及叶片研制(邀请报告)
  第五届高温结构材料发展战略研讨会,2017.11,西昌

  2. 燃气轮机用抗热腐蚀高温合金的材料研发与叶片研制(邀请报告)
  中国材料大会2017暨银洲银川国际材料周,2017.7, 银川

  3. 单晶高温合金第二取向与结构特征耦合下的力学行为(邀请报告)
  2017年先进热障涂层国际论坛暨高温结构材料会议,2017.6,昆明

  4. Development of high strength hot corrosion resistant single crystal superalloys based on understanding the effect of key elements on hot corrosion behaviour(Keynote)
  TMS 2017, February 26 –March 02, 2017, San Diego, USA

  5. Characterization of tilt and twist low angle grain boundaries and their effects on intermediate-temperature creep deformation behavior
  13th international symposium on superalloys, September 11-15, 2016, Seven Springs, USA

  6. 先进燃气轮机高温部件及超级合金材料研制(Invited)
  中国燃气轮机峰会,2016.4, 深圳

  7. 高强抗热腐蚀高温合金的研发与应用(Invited)
  第十三届中国高温合金年会,2015.5, 北京

  8. Recrystallization in directionally solidified Ni based superalloys (Invited)
  TMS 2015, March 16-19, 2015, Orlando, USA

  9. Hot-corrosion resistant superalloys for gas turbine (Invited)
  Energy materials 2014, November 4-6, 2014, Xian, China

  10. Effect of secondary orientation on mechanical properties of a Nickel base single crystal superalloy
  Euro superalloys 2014, May 12-16, 2014, Giens, France

  11. Microstructural evolution of a directionally solidified superalloy during long-term thermal and stress exposure (Invited)
  IUMRS-ICAM 2013, September 25-27, 2013, Qingdao, China

  12. 高温度梯度液态金属冷却定向凝固技术在燃气轮机涡轮叶片研发中的应用(邀请报告)
  第十二届中国高温合金年会, 2011.8,成都

  13. 高能同步辐射光源在先进高温合金材料及叶片研发中的应用
  香山科学会议406-高能同步辐射光源前沿科学和应用,2011.9,北京

 

近期学术活动:

  1. 2012-2017年中国材料大会高温合金分会共同主席

  2. Superalloys 2016国际会议组委会委员

  3. Euro superalloys 2014/2018国际会议组委会委员

个人网页: