人才信息库
许道奎
性 别 最高学历 博士研究生
职 称 研究员 专家类别 博士生导师
部 门 材料环境腐蚀研究中心
通讯地址 辽宁省沈阳市沈河区文萃路62号,中国科学院金属研究所,材料环境腐蚀研究中心
邮政编码 110016 电子邮件 dkxu@imr.ac.cn
电 话 +86-24-23915897 传 真 +86-24-23894149
简历:

  教育经历:

  2003/09 - 2008/07,中国科学院金属研究所,博士(硕博连读)  

  1998/09 - 2002/07,沈阳工业大学,材料系,学士

  工作经历:

  2015/10-至今 中国科学院金属研究所,材料环境腐蚀研究中心, 研究员

  2011/10 – 2015/10, 中国科学院金属研究所,材料环境腐蚀研究中心,副研究员

  2008/10 - 2011/10,澳大利亚莫纳什大学(Monash University),材料科学与工程学院,Research Fellow

研究领域:

  长期致力高性能轻质结构金属材料(镁合金、铝合金和钛合金等)的强度设计、力学与腐蚀损伤、性能提升等三个方面的研究,为满足高端设备轻量化和使役安全要求的轻质金属结构材料选取提供了实验依据和理论支持。

承担科研项目情况:

  主持了3项国家自然科学基金(51271183、51301172和51871211)等国家级课题项目。主要取得的创新性成果有三个方面:1)轻质合金在环境与载荷耦合条件下的损伤与断裂;2)轻质合金使役性能对微结构的响应规律;3)基于微结构优化的使役性能提升方法。在Acta Materialia, Electrochimical Acta, Corrosion Science, Scientific Reports, Scripta Materialia, Materials & Design和Journal of Alloys and Compounds等国际杂志上共计发表85篇科技论文,其中SCI论文65篇,第一或通讯作者SCI论文59篇,高被引文章2篇、高热点文章1篇,共计被他引1382次,单篇最高被他引125次,参加国际会议并做口头报告9次,作为第一发明人申请中国发明专利13项,授权10项,授权实用新型1项。2020年荣获中国高被引学者,获得辽宁省技术发明一等奖(排名第四)、黑龙江省冶金行业科技进步一等奖(排名第三)、师昌绪青年科技人才基金。

社会任职:

  担任Nature子刊《Scientific Reports》编委,腐蚀科学与防护技术的编委、《精密成形工程》通讯编委,《中国材料进展》“镁合金力学行为”专栏 特约编辑,国家材料表面处理产业技术创新战略联盟副理事长,“中国材料研究学会疲劳分会”理事,“中国材料研究学会镁合金分会”理事,中国材料研究学会镁合金分会-青年委员会主任委员,中国机械工程学会材料分会-青年工作委员会副主任委员。

获奖及荣誉:

    2019. 12   辽宁省“兴辽英才计划”青年拔尖人才 

    2018. 09   IFAM青年科学家奖

    2017. 03   2016年度黑龙江省冶金行业科技进步奖 一等(排名第三) 高性能镁基材料设计、制备与组织性能调控基础研究

    2016. 10   入选辽宁省第九批“百千万人才工程”的千人层次

    2016. 10   辽宁省技术发明一等奖(排名第四) 镁合金的腐蚀防护及提高使役性能的关键技术

    2016. 12   材料与结构青年论坛 突出贡献奖

    2015. 10  “师昌绪青年科技人才基金”

    2015. 09   入选辽宁省第九批“百千万人才工程”的万人层次

    2013. 11   中国科学院“青年促进会会员”

    2011. 10   中国科学院金属研究所“人才引进计划” 

代表论著:

  1).C.Q. Li, D.K. Xu*, B.J. Wang, L.Y. Sheng, R.Z. Wu, E.H. Han. Effect of icosahedral phase on the mechanical anisotropy of as-extruded Mg-14Li (in wt.%) based alloys. J. Mater. Sci. Technol. 35 (2019) 2477-2484.

  2).B.J. Wang, D.K. Xu*, J. Sun, E.H. Han, Effect of grain structure on the stress corrosion cracking (SCC) behavior of an as-extruded Mg-Zn-Zr alloy. Corrosion Science. 157 (2019) 347-356.

  3).B.J. Wang, D.K. Xu*, L.Y. Sheng, E.H. Han, J. Sun. Understanding to the deformation and fracture mechanisms of an annealing-tailored “bimodal” grain-structured Mg alloy. J. Mater. Sci. Technol., 35 (2019) 2423-2429.

  4).Bao-Jie Wang, Ji-Yu Luan, Dao-Kui Xu*, Jie Sun, Chuan-Qiang Li, En-Hou Han. Research Progress on the Corrosion Behavior of Magnesium-Lithium-Based Alloys: A Review. Acta Metallurgica Sinica (English Letters). 32 (2019) 1-9.

  5).B.J. Wang, D.K. Xu*, S.D. Wang, L.Y. Sheng, R.C. Zeng, E.H. Han. Influence of solution treatment on the corrosion fatigue behavior of an as-forged Mg-Zn-Y-Zr alloy. International Journal of Fatigue.120 (2019) 46-55.

  6).B.J. Wang, D.K. Xu*, S.D. Wang, E.H. Han. Fatigue crack initiation of magnesium alloys under elastic stress amplitudes: A review. Front. Mech. Eng. 14 (2019) 113-127.

  7).S.D. Wang, D.K. Xu*, B.J. Wang, L.Y. Sheng, Y.X. Qiao, E.H. Han & C. Dong. Influence of phase dissolution and hydrogen absorption on the corrosion behavior of Mg-7%Gd-5%Y-1%Nd-0.5%Zr alloy in 3.5 wt.% NaCl solution. Corrosion Science. 142 (2018) 185-200.

  8).Z.Y. Ding, L.Y. Cui, R.C. Zeng, Y.B. Zhao, S.K. Guan, D.K. Xu*, C.G. Lin. Exfoliation corrosion of extruded Mg-Li-Ca alloy. Journal of Materials Science & Technology. 34 (2018) 1550-1557.

  9).C.Q. Li, D.K. Xu*, X.-B. Chen, B.J. Wang, R.Z. Wu, E.H. Han, N. Birbilis. Composition and microstructure dependent corrosion behaviour of Mg-Li alloys. Electrochimica Acta. 260 (2018) 55-64. I

  10).B.J. Wang, D.K. Xu*, J.H. Dong, X.B. Chen, W. Ke. Effect of corrosion production film on the in vitro degradation behavior of Mg-3%Al-1%Zn (in wt.%) alloy in Hank’s solution. Journal of Materials Science & Technology. 34 (2018) 1756-1764.

  11).B.J. Wang, D.K. Xu*, Y.C. Xin, L.Y. Sheng, E.H. Han. High corrosion resistance and weak corrosion anisotropy of an as-rolled Mg-3Al-1Zn (in wt.%) alloy with strong crystallographic texture. Scientific Reports. 7 (2017) 16014.

  12).X.J. Wang, D.K. Xu*, R.Z. Wu, X.B. Chen, Q.M. Peng, L. Jin, Y.C. Xin, Z.Q. Zhang, Y. Liu, X.H. Chen, G. Chen, K.K. Deng, H.Y. Wang. What is going on in magnesium alloys? Journal of Materials Science & Technology. 34 (2018) 245-247.

  13).B.J. Wang, S.D. Wang, D.K. Xu*, E.H. Han. Recent progress in fatigue behavior of Mg alloys in air and aqueous media: A review. Journal of Materials Science & Technology. 33 (2017) 1075-1086.

  14).C.Q. Li, D.K. Xu*, Z.R. Zeng, B.J. Wang, L.Y. Sheng, X.-B. Chen, E.H. Han. Effect of volume fraction of LPSO phases on corrosion and mechanical properties of Mg-Zn-Y alloys. Materials & Design. 121 (2017) 430-441.

  15).C.Q. Li, D.K. Xu*, S. Yu, L.Y. Sheng, E.H. Han. “Effect of icosahedral phase on crystallographic texture and mechanical anisotropy of Mg-4%Li alloys”. Journal of Materials Science & Technology. 33 (2017) 475-480.

  16).C.Q. Li, D.K. Xu*, B.J. Wang, L.Y. Sheng, Y.X. Qiao, E.H. Han. Natural ageing responses of duplex structured Mg-Li based alloys. Scientific Reports. 7 (2017) 40078.

  17).C.Q. Li, D.K. Xu*, B.J. Wang, L.Y. Sheng, E.H. Han. Suppressing effect of heat treatment on the Portevin-Le Chatelier phenomenon of Mg-4%Li-6%Zn-1.2%Y alloy. Journal of Materials Science & Technology. 32 (2016) 1232-1238.

  18).D.K. Xu, E.H. Han*, Y.B. Xu. “Effect of long-period stacking ordered phase on microstructure and mechanical properties of Mg alloys: A review”. Progress in Natural Science. 26 (2016) 117-128.

  19).S.D. Wang, D.K. Xu*, B.J. Wang, L.Y. Sheng, E.H. Han & C. Dong. “Effect of solution treatment on stress corrosion cracking behavior of an as-forged Mg-Zn-Y-Zr alloy”. Scientific Reports. 6 (2016) 29471.

  20).S.D. Wang, D.K. Xu*, B.J. Wang, L.Y. Sheng, E.H. Han & C. Dong. “Effect of solution treatment on the fatigue behavior of an as-forged Mg-Zn-Y-Zr alloy”. Scientific Reports. 6 (2016) 23955.

  21).B.J. Wang, D.K. Xu*, J.H. Dong, W. Ke. “Effect of texture on biodegradable behavior of an as-extruded Mg-3%Al-1%Zn alloy in phosphate buffer saline medium”. Journal of Materials Science & Technology. 32 (2016) 646-652.

  22).J.G. Ren, L. Wang, D.K. Xu, L.Y. Xie, Z.C. Zhang. Analysis and Modeling of Friction Stir Processing-Based Crack Repairing in 2024 Aluminum Alloy. Acta Metallurgica Sinica (English Letters). 30 (2017) 228-237.

  23).D.K. Xu*, C.Q. Li, B.J. Wang, E.H. Han. “Effect of icosahedral phase on the crystallographic texture and mechanical anisotropy of duplex structured Mg-Li alloys”. Materials & Design. 88 (2015) 88-97.

  24).S.D. Wang, D.K. Xu*, B.J. Wang, E.H. Han, C. Dong. “Effect of corrosion attack on the fatigue behavior of an as-cast Mg-7%Gd-5%Y-1%Nd-0.5%Zr alloy”. Materials & Design. 84 (2015) 185-193.

  25).C.Q. Li, D.K. Xu*, T.T. Zu, E.H. Han, L. Wang. “Effect of temperature on the mechanical abnormity of the quasicrystal reinforced Mg-4%Li-6%Zn-1.2%Y alloy”. Journal of Magnesium and Alloys. 3 (2015) 106-111.

  26).D.K. Xu*, B.J. Wang, C.Q. Li, T.T. Zu, E.H. Han. “Effect of icosahedral phase on the thermal stability and ageing response of a duplex structured Mg-Li alloy”. Materials & Design. 69 (2015) 124-129.

  27).S.D. Wang, D.K. Xu*, X.B. Chen, E.H. Han, C. Dong. “Effect of heat treatment on the corrosion resistance and mechanical properties of an as-forged Mg-Zn-Y-Zr alloy”. Corrosion Science. 92 (2015) 228-236.

  28).S.D. Wang, D.K. Xu*, E.H. Han, C. Dong. “Stress corrosion cracking susceptibility of a high strength Mg-7%Gd-5%Y-1%Nd-0.5%Zr alloy”. Journal of Magnesium and Alloys. 2 (2014) 335-341.

  29).B.J. Wang, D.K. Xu*, J.H. Dong, W. Ke. “Effect of the crystallographic orientation and twinning on the corrosion resistance of an as-extruded Mg-3Al-1Zn (wt.%) bar”. Scripta Materialia. 88 (2014) 5-8.

  30).D.K. Xu, P.A. Rometsch, L. Li, L.M. Shen, N. Birbilis. “Critical conditions for the occurrence of quench cracking in an Al-Zn-Mg-Cu alloy”. Journal of Materials Science. 2014 (49) 4687-4697.

  31). D.K. Xu, E.H. Han. Effect of quasicrystalline phase on improving the corrosion resistance of a duplex structured Mg-Li alloy. Scripta Materialia. 2014 (71) 21-24.

  32). D.K. Xu, E.H. Han. Relationship between fatigue crack initiation and activated {10-12} twins in as-extruded pure magnesium. Scripta Materialia. 2013 (69) 702-705.

  33). D.K. Xu, T.T. Zu, M. Yin, E.H. Han. Mechanical properties of the icosahedral phase reinforced duplex Mg-Li alloy both at room and elevated temperatures. Journal of Alloys and Compounds. 2013 (582) 161-166.

  34). Y.B. Xu, D.K. Xu, X.H. Shao, E.H. Han. Guinier-Preston Zone, Quasicrystal and Long-period Stacking Ordered Structure in Mg-based Alloys, A Review. Acta Metallurgical Sinica-English letters. 2013 (26) 217-231.

  35). D.K. Xu, E.H. Han. Effects of icosahedral phase formation on the microstructure and mechanical improvement of Mg alloys: A review. Progress in Natural Science: Materials International. 2012 (22) 364-385.

  36). D.K. Xu, N. Birbilis and P.A. Rometsch. Effect of S-phase dissolution on the corrosion and stress corrosion cracking of an as-rolled Al-Zn-Mg-Cu Alloy”. Corrosion. 68 (2012) 1-10.

  37). D.K. Xu, P.A. Rometsch and N. Birbilis. “Optimization of solution treatment for an as-rolled Al-Zn-Mg-Cu alloy. Part I. Overheating issues of constituent particles”. Material Science and Engineering A. 534 (2012) 234-244.

  38). D.K. Xu, P.A. Rometsch and N. Birbilis. “Optimization of solution treatment for an as-rolled Al-Zn-Mg-Cu alloy. Part II. Microstructural evolution and mechanical improvement’. Material Science and Engineering A. 534 (2012) 244-252.

  39). D.K. Xu, N. Birbilis and P.A. Rometsch, “The effect of pre-ageing temperature and retrogression heating rate on the strength and corrosion behaviour of AA7150”. Corrosion Science. 54 (2012) 17-25.

  40). D.K. Xu, N. Birbilis, D. Lashansky, P.A. Rometsch and B.C. Muddle, “Effect of solution treatment on the corrosion behaviour of aluminium alloy AA7150: optimisation for corrosion resistance”. Corrosion Science. 53 (2011) 217-225.

  41).J. Ma, B. Zhang, D.K. Xu, E.H. Han and W. Ke. “Effects of inclusion and loading direction on the fatigue behavior of hot rolled low carbon steel”. International Journal of Fatigue. 7 (2010) 1116-1125.

  42).D.K. Xu, En-Hou Han, L. Liu and Y.B. Xu. “Influence of Higher Zn/Y Ratio on the Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Alloys”. Metallurgical and Materials Transactions A. 40A (2009) 1727-1740.

  43).D.K. Xu, L. Liu, Y.B. Xu and E.H. Han. “The micro-mechanism of fatigue crack propagation for a forged Mg-Zn-Y-Zr alloy in the gigacycle fatigue regime”. Journal of Alloys and Compounds. 454 (2008) 123-128.

  44).D.K. Xu, L. Liu, Y.B. Xu and E.H. Han. “The fatigue behavior of I-phase containing as-cast Mg-Zn-Y-Zr alloy”. Acta Materialia. 56 (2008) 985-994.

  45).D.K. Xu, L. Liu, Y.B. Xu and E.H. Han. “The relationship between macro fracture modes and roles of different deformation mechanisms for the as-extruded ZK60 Mg alloy”. Scripta Materialia. 58 (2008) 1098-1101.

  46).D.K. Xu, L. Liu, Y.B. Xu and E.H. Han. “The Influence of Developed Texture on the Mechanical Anisotropy and Deformation Modes of an As-extruded Mg-Zn-Zr Mg Alloy”. Materials Transactions. 49 (2008) 1011-1014.

  47).D.K. Xu, W.N. Tang, L. Liu, Y.B. Xu and E.H. Han. “Effect of W-phase on the mechanical properties of as-cast Mg-Zn-Y-Zr alloys”. Journal of Alloys and Compounds. 461 (2008) 248-252.

  48).D.K. Xu, L. Liu, Y.B. Xu and E.H. Han. “The crack initiation mechanism of the forged Mg-Zn-Y-Zr alloy in the super-long fatigue life regime”. Scripta Materialia. 56 (2007) 1-4.

  49).D.K. Xu, L. Liu, Y.B. Xu and E.H. Han. “Effect of microstructure and texture on the mechanical properties of the as-extruded Mg-Zn-Y-Zr alloys”. Materials Science and Engineering A. 443 (2007) 248-256.

  50).D.K. Xu, W.N. Tang, L. Liu, Y.B. Xu and E.H. Han. “Effect of Y concentration on the microstructure and mechanical properties of as-cast Mg-Zn-Y-Zr alloys”. Journal of Alloys and Compounds. 432 (2007) 129-134.

  51).D.K. Xu*, L. Liu, Y.B. Xu and E.H. Han. “The fatigue crack propagation behavior of the forged Mg-Zn-Y-Zr alloy”. Journal of Alloys and Compounds. 431 (2007) 107-111.

  52).D.K. Xu*, L. Liu, Y.B. Xu and E.H. Han. “The strengthening effect of icosahedral phase on the as-extruded Mg-Li alloys”. Scripta Materialia. 57 (2007) 285-288.

  53).D.K. Xu, L. Liu, Y.B. Xu and E.H. Han. “Ultra-high cycle fatigue behavior of the as-extruded magnesium alloy ZK60”. Acta Metallurgica Sinica. 43 (2007) 144-148.

  54).D.K. Xu*, L. Liu, Y.B. Xu and E.H. Han. “The effect of precipitates on the mechanical properties of ZK60-Y alloy”. Materials Science and Engineering A. 420 (2006) 322-332.

  55).D.K. Xu*, L. Liu, Y.B. Xu and E.H. Han. “The influence of element Y on the mechanical properties of the as-extruded Mg-Zn-Y-Zr alloys”. Journal of Alloys and Compounds. 426 (2006) 155-161.

学术活动(近期国际国内会议报告):

  1). D.K.Xu, E. H. Han. Fatigue behavior and crack initiation mechanisms of Mg alloys. CAMS2018-Advancing Materials & Manufacturing University of Wollongong, New South Wales (NSW), Nov 27-29, 2018, Australia (邀请)

  2). D.K.Xu, E. H. Han. Fatigue behavior of Mg alloys. Seminar for prominent young scientists working on Mg alloys in both Australia and China, Gold Coast, Queensland (QLD), Dec 1-2, 2018, Australia. (邀请)

  3). 许道奎.新型高性能超轻镁锂合金的制备及其使役行为研究. 2018新材料国际发展趋势高层论坛-第四届IFAM优秀青年科学家分论坛,2018.9.16, 沈阳. (邀请)

  4). D.K.Xu, E. H. Han. Fatigue behavior and crack initiation mechanisms of Mg alloys. International Conference of Asia Pacific Academy of Materials 2018, June 19-22, Shenyang (邀请)

  5). D.K.Xu, E. H. Han. Fatigue behavior of Mg alloys with different microstructure in the high and super-high cyclic regime. Symposium DD. Magnesium Alloys, Chinese Materials Conference July 10-14, 2015, Guiyang, China. (口头)

  6). D.K.Xu, E. H. Han. Effect of quasicystalline phase on strength and corrosion resistance of a duplex structured Mg-Li alloy. 19th International Corrosion Congress, Nov 2-6, 2014, Jeju, Korea. (口头)

  7). D.K.Xu, Effect of heat treatment on the microstructure and service properties of an Al-Zn-Mg-Cu alloy. The 2ed ICYRAM, Oct 24-27, 2014, Haikou, China. (邀请)

  8). 许道奎, 韩恩厚. 新型准晶强化Mg-Li轻质合金的结构与性能. 先进镁合金材料及应用技术, 中国材料大会, 成都, 2014年7月4-8. (口头)

  9). D.K.Xu, E. H. Han. Effect of ageing parameters on corrosion and strength of AA7150 alloy in the T7751 temper. The 4th IMR-KIMS joint Symposium on Ti and Al alloys. Oct 18-19, 2013, Shenyang, China. (口头报告)

  10). D.K.Xu, E. H. Han. Fatigue behavior of Mg alloys in the high and super-high cyclic regime. 13th

International Conference on Fracture (ICF13). Jun 16-22, 2013, Beijing, China. (口头报告)

  11). D.K.Xu, E. H. Han. Fatigue behavior of Mg alloys in the high and super-high cyclic regime. The 3rd IMR-KIMS joint Symposium on Mg, Ti and Al alloys. Nov 29-Dec 1. 2012, Changwon, Korea. (口头报告)

  12). D.K.Xu, E. H. Han. Fatigue behavior of I-phase containing as-cast Mg-Zn-Y-Zr alloy. Asian Pacific Conference on Fracture and Strength – Mechanics and Materials 2012 (APCFS-MM 2012). May 13-16, 2012, Busan, Korea. (口头报告)

  13). D.K.Xu, P.A. Rometsch, N. Birbilis. Effect of ageing parameters on the corrosion and strength of Aluminium alloy AA7150 in the T7751 temper. The 1st Europe Conference of Aluminium Alloys (ECAA). Oct 5-7, 2011, Bremen, Germany. (口头报告)

  14). D.K.Xu, P.A. Rometsch, H. Chen, S.X. Gao and B.C. Muddle. Effect of Solution Treatment on Microstructure and Mechanical Properties of Thick Plate Aluminium Alloy 7150. Proceedings of the 12th International Conference of Aluminium Alloys (ICAA 12). Sep 5-9, 2010, Yokohama, Japan. (口头报告)

  15). D.K.Xu, P.A. Rometsch, H. Chen and B.C. Muddle. Influence of Solution Treatment on Microstructure and Quench Cracking in a Water-Quenched Aluminium Alloy 7150, The 7th Pacific Rim International Conference on Advanced Materials and Processsing. Aug 2-6, 2010, Cairns, Australia. (口头报告)

  16). E.H. Han, D.K.Xu. Fatigue Behavior of Mg-Zn-Y-Zr Alloy, The 1st Japan-China Joint Symposium on Fatigue of Engineering Materials and Structures, Nov. 20-22, 2008, Japan. (特邀)

近期获得专利: 

  1). 发明专利,第一发明人,改善高强度Mg-Gd-Y-Nd-Zr镁合金塑性成型能力的有效方法. 专利号:201610913399.1

  2). 实用新型,第一发明人,可高低倍在线观测材料形变及损伤原位测试系统及使用. 专利号:201621117413.9

  3). 发明专利,第一发明人,提高镁合金耐蚀性并能弱化腐蚀速率各向异性的有效方法. 专利号:ZL 2016 1 0445288.2

  4). 发明专利,第一发明人,提高长程结构有序相强化双相镁锂合金性能的热处理工艺. 专利号:ZL 2016 1 0445399.3

  5). 发明专利,第一发明人,一种调控镁合金腐蚀速率的有效方法. 专利号:ZL 2015 1 0861755.5

  6). 发明专利,第一发明人, 一种提高Mg-Zn-Y-Zr镁合金耐腐蚀性的热处理工艺. 专利号: ZL 2014 1 0409095.2

  7). 发明专利,第一发明人,一种抑制准晶强化镁锂合金塑性失稳的热处理工艺. 专利号: ZL 2014 1 0394678.2.

  8). 发明专利,第一发明人,含准晶高抗腐蚀性能镁合金及其制备方法和应用. 专利申请号: 201310214206.X

  9). 发明专利,第一发明人,一种高抗蠕变能力的含准晶双相镁锂合金及其制备方法. 专利申请号: 201310133100.7.

  10). 发明专利,第一发明人,有效利用稀土元素Y强化Mg-Zn-Y-Zr系镁合金的制备方法. 专利号: ZL 2007 1 0011501.X.

  11). 发明专利,第一发明人,一种准晶相强化镁锂合金及其制备方法. 专利号: ZL 2006 1 0134114.0.

个人网页: